MV-90 Magnetic Dryer Vent Coupling

Description

Menu
Other Items
Feedbacks
About Us
Contact Us
Add To Favorites
MV-90 Magnetic Dryer Vent Coupling
For 90° Venting, or Vent Pipes Exiting Side Wall, Floor or Ceiling in New & Existing Construction.
Strong Magnets Self-Align & Attach Dryer Hose to Exit Vent.
Utilizes Zero Flame Spread, UL 2158A Approved Dryerflex Transition Hose.
Shorter Dryer Hose & More Rigid Metal Pipe Reduces Drying Time & Utilities…It Pays For Itself!
Easy, Solid Installs that Boost Dryer Efficiency & Safety!
Product Description
180 Degree Vent Path
✓
90 Degree Vent Path
✓
Any Way Vent Path
✓
Self Aligning
✓
✓
Included Hose Length
12" Pre Attached UL"2158A
12" Pre Attached UL"2158A
No Hose Included
Dryer Offset
9" or greater
0-3"
3-9"
The MV-90 is designed for when the vent path takes a 90 degree turn, such as down through the floor, up through the ceiling, or off to the side.
The MV-90 can handle offsets up to 3 inches from center to center.
The more accurately you line up the MV-90 with the vent on the back of your dryer, the better the vent path and the further back you can locate your dryer. Normally, the MV-90 requires 5 1/2 inches of clearance behind the dryer. If an obstruction necessitates you locate the MV-90 at the maximum 3 inch offset, then your dryer will need to sit out an additional 3 inches to allow for a bend radius in the transition duct.
Same wall offsets greater than 9 inches:
Simply mount the MV-90 directly behind your dryer, plug the 90 degree elbow into the wall vent, and measure for the required length of rigid metal pipe between them. Make sure to measure from where the pipe will stop on the MV-90 to the stop on the male end of the rigid metal pipe.
Close vent offsets between dryer and wall vent located on same wall as dryer (Offsets between 0-3 inches):
If your same wall offset is between 0 and 3 inches, then the MV-180 is the product for you.
Item Specification
Item model number
MV-90
Part Number
MV-90
Batteries Required?
No
Finish
Anodized Aluminum
Item Package Quantity
1
Product Dimensions
8.9 x 6.3 x 5.4 inches
Country of Origin
USA
Hose Length
12 Inches
Item Weight
3.5 pounds
Batteries Included?
No
Is Discontinued By Manufacturer
No
Manufacturer
, LLC
Dimensions
Shipping
Returns
Additional Info
Product Dimensions: 6.3 inches x 8.9 inches x 5.4 inches. Weight: 3.5 lb
Fast shipping is very important for us.
Our standard shipping service is FREE.
Your order will be shipped within 1-3 business days upon full payment received.
Most items are delivered within 3-5 business days, however, please allow 3-10 business days.
We are shipping only to USA.
We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
We offer a 30 day return policy from checkout winning date.
Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization.
Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem.
Return shipping fees are not refundable.
We reserve the right to decline any returns if the above guidelines are not followed.
All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications.
If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.