1000W 220V Aluminum alloy turbine hydroelectric generator house water generator

Description

1000W 220V Aluminum alloy turbine hydroelectric generator house water generator
Instructions for hydraulic installation of micro-hydrogenerator
This description applies to the description of the drop of 50 mm pipe through the water pipe. The 50 pipes of this generator can be used as a reference for the description. They are all tested. The drop is based on the vertical drop as the standard. The length is not used as a reference. The vertical height is accurate. The vertical height is 10 meters and the drop length is 30 meters. It is only a drop of 10 meters. You say that your pipe is 100 meters or two hundred meters. It is useless, because there is no hydraulic impact force without the vertical drop height. The water volume requires 50 mm pipes to pass through the water pipe. Full tube, the power generation is different with the height of the drop. Taking the 1000 watt micro hydro generator as a reference, the vertical drop of about 3 meters can generate 10 watts to 20 watts, 10 meters can generate 100 watts to 300 watts, and 15 meters can generate 300 watts to 500 watts, 20 meters can generate 500 watts to 700 watts, 30 meters can generate 700 watts to 1000 watts, this is based on the vertical drop as the standard, not your length, generator installation and use please follow the instructions, generator water outlet Connect a drain pipe, try to drain the water as far as possible, connect the pipes around the generator, don't let the water fly around, wrap the leaking place with plastic bag or electric tape, and cover the generator head with something. Put the generator in a place where rain can't soak. Pay attention to all the lines. Do not have a short circuit due to electric shock. The water pipe is connected to the outlet and the drain is connected. The pipe drains the water away. You can buy a sewer drain pipe PVc to connect to the generator outlet. The generator's outer diameter should be larger. It can't be inserted directly. Bake the PVC connector with fire and put the plastic connector. Use fire to soften it and then it can be put in. After putting it in, seal the gap with AB glue. The generator only needs to pay attention to the waterproof work
Notice
Pay attention to the leakage of water pipes. It is forbidden to spray water on the generator head, and the generator head should be kept without water spray.
On the machine head, if there is water spray on the generator, please wrap the water spray position. The generator head should be kept dry. It is strictly forbidden to spray the generator head with water.
eBay Cross Border Trade powered by ChannelEffect